If you’ve ever tried the liquid layers in a jar, here is a great twist for showing your superheroes the layers in the ocean. This activity definitely requires some help from an adult to do but my preschoolers really enjoyed watching the layers stack on top of each other. Older kids will love doing it on their own. ( I also have Simplified Ocean Zones in a Bottle for the youngest superheroes as the layers in this one can get tricky at the end.)
Here’s what you’ll need to get started:
- Light Karo syrup (corn syrup) – tinted black or dark purple OR Dark Karo Syrup (no tinting needed)
- Blue dish soap
- Water tinted light blue
- Vegetable oil – tinted blue-green (if possible)
- Rubbing alcohol (91% works best)
- food color (or liquid watercolors)
- glass jar (I used a pint sized glass jar)
First add about 1-1.5 inches of corn syrup to the jar. Add some black/dark purple color to it and mix well. (For my Tiny Tot class, I tried the dark Karo syrup and it worked great since we didn’t have to tint it black) This represents the deepest ocean zone, the Trench.
Carefully add the blue dish soap on top of the corn syrup layer. The layers should not mix. This second layer represents the Abyss.
Next carefully add the blue water. Don’t tint it too dark. The water layer should sit right on top of the dish soap creating 3 distinct layers. The water layer represents the Midnight Zone of the Ocean.
The next layer will be the oil. Food color and watercolor will not dissolve in oil since they are water based and oil and water don’t mix.
For this layer, you have 2 options: leave it yellow OR if you have candy food color (oil-based food color) then you can use that to tint the oil.
Either way, you will definitely get a distinct layer on top of the water. I used the candy color to get a greenish-bluish color.
This layer represents the Twilight Zone.
The last layer is a bit tricky. The rubbing alcohol to use should be 91%. The 50% definitely didn’t work and the 70% was not too successful either. We poured some rubbing alcohol into a cup first.
Use a dropper to slowly add the rubbing alcohol by touching the edge of the jar so that it drips down the side. Be careful not to let it break through the oil layer or else it will mix with the water. It will be slow-going but will slowly reveal a clear layer on top of the oil layer. This layer represents the Sunlight Zone, the part of the ocean where most marine life exist.
All done! You can also add labels to the outside of the jar to show your superheroes the layers.
Visually you can see how the layers (ocean zones) get darker as you go deeper. From the picture it is hard to tell that the layers are getting darker at the top (the oil looks darker than it actually is). You can discuss with your little ones what effect this might have on the marine life that lives in each layer.
The Science behind the Activity:
There’s all sorts of awesome science in this activity! This is a great visual representation of how the layers of the ocean have varying amounts of light reaching them. This can open up an entire discussion of why there are so many more organisms in the Sunlight Zone and the Twilight Zone versus the Abyss and the Trench. You can even research what types of organisms exist in each layer.
The other awesome science in this activity has to do with the different densities of various liquids. Liquids that are more dense (more mass per volume) will sink and liquids will lower densities will float on top of denser ones. If you have ever tried to mix oil and water, well, you know why that won’t work because oil is less dense than water. This is why you have to shake your favorite salad dressings before pouring.
Here’s where I got my idea from: http://www.icanteachmychild.com/make-ocean-zones-jar/
Extension: This activity goes really well with my Exploring Life in the Ocean Zones activity.